Matemaattisten olioiden 3D tulostus

The last week of our project started with the finished video of using our website. Link below.

https://drive.google.com/open?id=15eUz_4efmKGdclWwjuC91nDTaZ45zUgN

We successfully returned the final report. During

On Monday our group presented our solution at the grand finale dress reherseal, check the video below.

https://drive.google.com/open?id=1hpGVKBsz0LnPfO5lijaYUcN_rFjVtI9M

We received some useful feedback and are going

During this week our group continued to work on our final submission and project content. On Monday, we received the objects we printed last week in Addlab, using the powder bed

This week was devoted to finalising our project content and getting started on the final submission.

One of our group members went above and beyond to make sure we

This past week was even quieter than usual. During Saturday our team gathered in Iso Omena library and printed fractal tree, the model of which we acquired from Thingiverse (https://www.thingiverse.com/thing:26369).

This past week was quieter than usual. Our team focused on refining our project solution by developing our website, as well as our presentation. To this end, we also

What was done?

During the week our group did some more printing. This time, we tested a newer printer, Ultimaker 3. For our first test we printed a

Our group’s energetic week began on Monday at Sello library, where we managed to print our first successful object, truncated cube. Here are some cool pictures of the printing process:

During Thursday our group visited Fablab according to our reservation to manufacture our first 3D-printed object, Honeycomb (stereographic projection, hexagonal lattice).

Picture of Honeycomb from https://wwwshapewayscom/product/4LG52RNML/honeycomb-stereographic-projection

On our first try we attempted printing a hexagonal stereographic projection model. We left the model to print at fablab unattended due to issues with reserving a time. We came back in the

We explored the available options for 3D-printing in Aalto, and found that there are three different workspaces that provide access to 3D printers: Aalto Fablab, Aalto ADDlab and Aalto Design Factory

Our group met with professor Kirsi Peltonen on Wednesday and managed to deepen the insight of our problem. Professor Peltonen stated her own wishes she wanted to manifest with the power

Our agenda was to define the problem we are going to solve during the course, generate initial ideas, and prepare a presentation for Monday. Naturally, we had to create the required blog

– Listatkaa ainakin kolme ryhmän käyttämää ideointityökalua (brainstorming-luennolta tai muualta)

Used creative problem-solving techniques

Brainstorming: Throwing all the